passenger heat vent removal
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
passenger heat vent removal
how do you remove the passenger side vents?
i removed the driver side by just pulling on them... the passenger side wont come out.. i tried with a key under it it removed the carbon fiber trim.. thats all
any idea?
i removed the driver side by just pulling on them... the passenger side wont come out.. i tried with a key under it it removed the carbon fiber trim.. thats all
any idea?
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
i didnt end up trying.. but i saw the clips they are on the sides
i took the driver side ones apart into peices cleaned them very good and gave them a nice steaming job it was unreal the amount of dust inside of them.. kinda disgusting lol
but maybe ill finish them today.. ill let you know if they come out lol
i got busy wiring up the turn signal mirror one side is done
i took the driver side ones apart into peices cleaned them very good and gave them a nice steaming job it was unreal the amount of dust inside of them.. kinda disgusting lol
but maybe ill finish them today.. ill let you know if they come out lol
i got busy wiring up the turn signal mirror one side is done
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2009
Location: Fort crack homie
Posts: 2,894
Likes: 0
Received 0 Likes
on
0 Posts
i will when im done.. should be next week when i get the mirror in.. thanks to "sawgunner"
i might also take a video of how to remove/install the mirror
how to remove/install door panels and also where i wired it..
i didnt wanna touch the harness and look for which one controls the signals.. so i tapped the wires to the flasher button works like a charm
i might also take a video of how to remove/install the mirror
how to remove/install door panels and also where i wired it..
i didnt wanna touch the harness and look for which one controls the signals.. so i tapped the wires to the flasher button works like a charm
Thread
Thread Starter
Forum
Replies
Last Post