This is what I did...(is this in the "techinfo" section???)
Gently peeled backing away
Slowly applied to surface, using a piece of cardboard to smooth out any bubbles or wrinkles (I went from left to right).
Waited 10 minutes
Slowly peeled from right to left the top piece away from the lettering.
Some letters would not stay, I found that the letters themselves had pieces of the backing stuck to them, after I removed the little pieces, I pushed the letter to the glass (from the front piece) and repulled
After I removed the front piece, I smoothed the whole thing over to make sure all the letters adheared.
February 2004 Car Of The Month[/size]