Scanned my 95
06-30-2007, 05:02 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Apr 2007
Location: Sellersville, PA
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Scanned my 95
No codes and everything looked normal from what I could tell. One was a little odd. I used the Actron 9145 and exhaust oxygen would change between rich to lean every second. This happened at both idle and higher RPMs. It does seem to stay on lean a few seconds longer at 1500-2000 rpm range though. Is this a sign of a tired oxygen sensor or a properly operating one or something else?
06-30-2007, 05:59 PM
#2
Senior Member
Posts like a Camaro
Join Date: Apr 2005
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
With a scanner, you can watch the Bank 1 sensor. Watching the mV reading .. it should flip flop between high and low numbers fairly quickly. Hi being 6-800 and low being 0-150. The higher and lower the numbers and the faster it moves..the better the sensor is reading.
http://www.bonnevilleclub.com/forum/...ic.php?t=80691
Hope that helps a bit.
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Everything Electrical & Electronic
1
10-13-2004 10:36 PM