winter plans
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
winter plans
my winter plans are to
port polish set a 4781 heads
pcm or tuner
hv3
postless TB
port rear exhaust manifold
buy 2 light weight wheels and 25 inches drag radials
2008 goal 14.50 or better
port polish set a 4781 heads
pcm or tuner
hv3
postless TB
port rear exhaust manifold
buy 2 light weight wheels and 25 inches drag radials
2008 goal 14.50 or better
#3
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
15% tint
slotted rotors
Quiet stop pads all around
Energy Suspension end links
GXP STB
Replace rear 6x9'* (blown)
Fix radio lights
Ported M90?
slotted rotors
Quiet stop pads all around
Energy Suspension end links
GXP STB
Replace rear 6x9'* (blown)
Fix radio lights
Ported M90?
#4
PopaDopaDo
True Car Nut
Coolant flush
180 themo
LIM Gasket. Thinking of Porting the LIM.
O2 sensor
SC inspection and oil change
Replace Brake Fluid & Bleed at all 4 corners, adjust rears as needed.
Paint Calipers and Drums.
Tires
glue cpu heatsinks all over my SC and run ram air ductwork for cooling.
see whos paying attention.
I bet I don't get all that done.
180 themo
LIM Gasket. Thinking of Porting the LIM.
O2 sensor
SC inspection and oil change
Replace Brake Fluid & Bleed at all 4 corners, adjust rears as needed.
Paint Calipers and Drums.
Tires
glue cpu heatsinks all over my SC and run ram air ductwork for cooling.
see whos paying attention.
I bet I don't get all that done.
#6
Senior Member
True Car Nut
Join Date: Jul 2006
Location: Granville, Ohio ~NEBF '07 Survivor~
Posts: 5,001
Likes: 0
Received 0 Likes
on
0 Posts
(In order)
New Transmission (to be taken care of in the next week or two)
Shift Kit
U-Bend delete, hi-flow cat and Flowmaster 80
Intense Stage II kit (full tune up will be done along with it)
New Transmission (to be taken care of in the next week or two)
Shift Kit
U-Bend delete, hi-flow cat and Flowmaster 80
Intense Stage II kit (full tune up will be done along with it)
#7
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
how do you plan on porting the tubing on your rear mani
while the heads are off i will clean and port it make it smoother from this
to this
#8
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Buy & install a new fuel tank, sender, high flow pump.
Larger injectors
Save enough to buy an intense LSD & Stage 3 heads with 1.8s for the spring
And maybe track down a good shop for doing custom 3” exhaust even though my current exhaust is only 7 months old
And many other odds and ends with this money pit
Ed
Larger injectors
Save enough to buy an intense LSD & Stage 3 heads with 1.8s for the spring
And maybe track down a good shop for doing custom 3” exhaust even though my current exhaust is only 7 months old
And many other odds and ends with this money pit
Ed
#9
Senior Member
Posts like a Northstar
Join Date: Jul 2007
Location: Memphis,TN Originally from MA
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to sidetrack for a sec. McGrath, with all the stuff listed in your sig, what kind of times do you get? sounds like you got it built pretty good.
#10
Senior Member
True Car Nut
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
firebuick, I can appreciate the fact that you're motivated to do some work on your car during the winter months, and those of us in Ontario know how cold it can get in Montreal. I have to tell you that I absolutely hate working in the cold. That being said, I have to motivate myself to get a list of things to do to the car also. Oh.........ya, did I tell you I hate the cold?