Spring is coming! share your plans for your Bonney projects!
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Spring is coming! share your plans for your Bonney projects!
So far i have: K&N air filter, dual flow master mufflers, vented/drilled rotors, painted calipers, e3 spark plug(these are the SHIZ NITTTT)!!!!
in the spring, hi-flo cat, resonator removal, swap out ribbed air box pipe for stain less steel pipe, headlight clearing, HID upgrades( hi and low beams) possible super chip install(im still researching these)
in the spring, hi-flo cat, resonator removal, swap out ribbed air box pipe for stain less steel pipe, headlight clearing, HID upgrades( hi and low beams) possible super chip install(im still researching these)
#2
Administratus Emeritus
Certified Car Nut
Talk about the dead coming out of the grave! This thread was 5 years old. I made it your own Nobotada.
I dont particularly like alot of the people who posted in the old one. And since I have the "magic buttons" to the Forum....... Heheheeeeeee.
I'm going to order new Strut cartridges and rebuild my airstruts and get my air suspension back on track. Driving around town an inch or two off the ground bottoms them out big time and they are trashed. But first spring vacations and rebuilding my Dodge Dually come first. It will be time to launch the boat in a month.
I dont particularly like alot of the people who posted in the old one. And since I have the "magic buttons" to the Forum....... Heheheeeeeee.
I'm going to order new Strut cartridges and rebuild my airstruts and get my air suspension back on track. Driving around town an inch or two off the ground bottoms them out big time and they are trashed. But first spring vacations and rebuilding my Dodge Dually come first. It will be time to launch the boat in a month.
#4
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
Lets see, I have a set of projector headlights coming back pretty soon, just got my exhaust done last Friday, I think i'm done with all the things i'm going to add basically, I call her the SEi now lol, the only thing missing is an L67 and body parts from an SSEi and I like the SE ones better, oo one big thing an HV3 insert from ZZP
other than that its basically normal maintainance, new plugs and wires, new fuel filter, touch up the underbody with some black paint, paint the calipers red, get my angel eyes for my fog lights working, get a new box for my subs, new horns because they are really quiet once you beep a few times, like if the alarm goes off they beep a few times and then are really quiet, same if you actually beep it, I think thats about it for now lol
other than that its basically normal maintainance, new plugs and wires, new fuel filter, touch up the underbody with some black paint, paint the calipers red, get my angel eyes for my fog lights working, get a new box for my subs, new horns because they are really quiet once you beep a few times, like if the alarm goes off they beep a few times and then are really quiet, same if you actually beep it, I think thats about it for now lol
#5
Senior Member
Posts like a Northstar
Join Date: Oct 2003
Location: Greater Cleveland area, Ohio
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
I need a touch of auto-body work as my baby is starting to rust at the gas cap/filling area and the area just below it. I still think they should have put a plastic insert in that compartment like my wife has on her '99 buick century.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Probably build a transmission for the Bonneville. Set some new pb in the 12'* while shocking and amazing people with what my relaxed looking car can do.
GTP: Drop in a motor and trans. Push it out the door for cash.
Regal GS: Figure out the noise that the previous owner caused in the engine and put it on the road.
GTP: Drop in a motor and trans. Push it out the door for cash.
Regal GS: Figure out the noise that the previous owner caused in the engine and put it on the road.
#9
Senior Member
True Car Nut
Well my list is a Spring/Summer kinda thing....
1 ) UIM/LIM gasket replacements
2 ) 1:9 Rockers and 105# springs
3 ) Wideband O2 install
4 ) Aeroforce Gauge install
5 ) 160 T-Stat
6 ) 3.2 Pulley
7 ) Autolite 104'*
8 )Tune - Tune - Tune
9 ) Fuel Rails
10 ) Rear Shocks
11 ) TB Heat Shield
1 ) UIM/LIM gasket replacements
2 ) 1:9 Rockers and 105# springs
3 ) Wideband O2 install
4 ) Aeroforce Gauge install
5 ) 160 T-Stat
6 ) 3.2 Pulley
7 ) Autolite 104'*
8 )Tune - Tune - Tune
9 ) Fuel Rails
10 ) Rear Shocks
11 ) TB Heat Shield
#10
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Wow it looks like the bug is kicking into full gear as the weather gets better. I've got a pully swap coming up and the more i learn about it the more nervous im getting. lol