Spring build comes early
#61
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Just about. haven't labeled everything yet, but I have a drawer of sensors, a drawer with throttle body parts, a drawer with relays and stuff, you get the idea.
#66
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Started out about 9am. Another nice warm day
Lined up the balancer shaft.
Lined up the timing gears.
Got the timing chain cover on.
Lifters in place. Still had a little bit of coolant pooled up.
Got the power steering pump and water pump pulley in place. That was a mistake, had to remove them again to get the motor mount on.
Tensioner in place.
8 rib Harmonic balancer in place.
Motor mount mounted and belts put in place.
LIM gaskets in place and ready to install the LIM
LIM went in without any problems.
Rockers installed.
Intercooler core installed.
Nearly done, supercharger installed.
Valve covers installed.
Everything installed.
Tomorrow I have to do a lot of cleaning, running wires better, and fixing the HVAC lines I forgot to run.
And now for the video. I have a big vacuum leak under the supercharger at the intercooler core, just like I had last year. Going to be another pain to fix..
Lined up the balancer shaft.
Lined up the timing gears.
Got the timing chain cover on.
Lifters in place. Still had a little bit of coolant pooled up.
Got the power steering pump and water pump pulley in place. That was a mistake, had to remove them again to get the motor mount on.
Tensioner in place.
8 rib Harmonic balancer in place.
Motor mount mounted and belts put in place.
LIM gaskets in place and ready to install the LIM
LIM went in without any problems.
Rockers installed.
Intercooler core installed.
Nearly done, supercharger installed.
Valve covers installed.
Everything installed.
Tomorrow I have to do a lot of cleaning, running wires better, and fixing the HVAC lines I forgot to run.
And now for the video. I have a big vacuum leak under the supercharger at the intercooler core, just like I had last year. Going to be another pain to fix..
#70
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
The vacuum leak is between the LIM and the intercooler plate. Took a lot of RTV to seal it up last time.
yes, the strut bar is still leaning on the bench. It will go in after I'm done dealing with the details.
yes, the strut bar is still leaning on the bench. It will go in after I'm done dealing with the details.