When getting a used 3800...
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Oct 2003
Location: Pittsburgh, Pa.
Posts: 7,551
Likes: 0
Received 0 Likes
on
0 Posts
When getting a used 3800...
how do you tell the difference between an n/a motor and a supercharged motor(visually, and without the */c obviously)?
#3
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
If the LIM has a big square cut out, and a circular cut out, it'* */C'd.
If it has 6 holes going into it.....then it'* N/A'd if I remember correctly.
If you could just get the 8th of the VIN too off the car, then you can tell that way
K= N/A'd
1= */C'd.
If it has 6 holes going into it.....then it'* N/A'd if I remember correctly.
If you could just get the 8th of the VIN too off the car, then you can tell that way
K= N/A'd
1= */C'd.
#5
Senior Member
True Car Nut
Originally Posted by LakevilleSSEi
If the LIM has a big square cut out, and a circular cut out, it'* */C'd.
If it has 6 holes going into it.....then it'* N/A'd if I remember correctly.
If you could just get the 8th of the VIN too off the car, then you can tell that way
K= N/A'd
1= */C'd.
If it has 6 holes going into it.....then it'* N/A'd if I remember correctly.
If you could just get the 8th of the VIN too off the car, then you can tell that way
K= N/A'd
1= */C'd.
If the LIM isn't on the block, you can check the heads for fuel injector bosses. SC motors have injectors that go directly into the heads, so you'll see injector ports in the heads. NA motors have injectors that seat into the LIM, so if the LIM is gone and you don't see injector bosses in the heads, you know it'* an NA block.
Additionally, if all you need is the bare block, they're exactly the same between NA and SC (at least with Series 2 stuff).
#7
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
95 * II N/A'd LIM:
95 * I */C'd LIM (looks the same between 1 and 2 IIRC anyways, some minor differences):
95 * I */C'd LIM (looks the same between 1 and 2 IIRC anyways, some minor differences):
#10
Senior Member
True Car Nut
Originally Posted by big_news_1
If the LIM isn't on the block, you can check the heads for fuel injector bosses. SC motors have injectors that go directly into the heads, so you'll see injector ports in the heads. NA motors have injectors that seat into the LIM, so if the LIM is gone and you don't see injector bosses in the heads, you know it'* an NA block.
Originally Posted by 95naSTA
If your looking at S2 engines and the LIM is gone, look for injector bosses in the heads. If there there then it'* a L67 if not L36.
Oooh! I beat you by 2 hours!