got my silverstars and cyberwhites..
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2003
Location: Romeo, Michigan
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
got my silverstars and cyberwhites..
I put Silverstar Low and High'* in my car, and cyber white fog lights. The fog lights made a huge difference. The silverstars on the other hand, only the left side has the blue tint to it, and the other side doesnt. Is this because the one with the blue tint is a new headlight assembly, and the other one, is the original headlight assembly? Im kinda dissapointed that one only looks blue and bright as he**. Also, the other one is like steamed up inside, and is all pitted and stuff.
Rob
Rob
#2
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2003
Location: Sioux Falls, SD
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
You got a bad bulb man!!!! Thats a bummer! Hope you still have the reciept! and remember, you pulled it out of the package that way!
Good luck!!!!
Good luck!!!!
#3
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, could be a bad bulb, or just that headlight assembly you're talking about that'* pitted and has condensation in it makes it look like the light is not as bright :? I'd take that headlight assembly apart and dry it out and reseal it with some clear RTV, and make sure no moisture can get in. Also make sure you don't touch the glass of the bulbs.
#4
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2003
Location: Sioux Falls, SD
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I thought he was talking about the bulb being cloudy and pitted....I had one like that one time, so I thought that is what he was talking about. I hope its just the bulb and not the headlight Assem!!!
#5
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Charlotte, NC ________ SEBF 07 survivor
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Don't think it'* the bulb. I've seen quite a few cars with the headlight assey being pitted and condensation on the inside.
#6
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2003
Location: Romeo, Michigan
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Im gonna switch bulbs today, and see if its the bullb or not. Its probably the headlight assembly. Its all cloudy, has condensation in it, and it pitted, where my other headlight is brand new, and clean due to "the accident". But shouldn't they both be blue? not just the one? or is the old headlight assembly so dirty, it doesnt show the blue?
Rob
Rob
#7
Senior Member
Posts like a Northstar
Join Date: Oct 2003
Location: RI
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Re: got my silverstars and cyberwhites..
Originally Posted by bonnieman92
I put Silverstar Low and High'* in my car, and cyber white fog lights. The fog lights made a huge difference. The silverstars on the other hand, only the left side has the blue tint to it, and the other side doesnt. Is this because the one with the blue tint is a new headlight assembly, and the other one, is the original headlight assembly? Im kinda dissapointed that one only looks blue and bright as he**. Also, the other one is like steamed up inside, and is all pitted and stuff.
Rob
Rob
http://www.1aauto.com/1A/FrontLights...LP1590063/9722
#8
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
I'd say it is the assembly.... I took a rock or something in my 91 a few years ago and bought a new assembly. It looked so much better then the old assembly on the other side. I was going to go out and buy a new assembly for the old side, but I got whacked in a car accident and I got a new one out of the deal anyways.
#9
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2003
Location: Romeo, Michigan
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Its the bulb. I switched bulbs and now the old assembly looks blue and better.
Rob
I also made my side markers clear today. It looks real good except for the one I had to glue together, because i accidently busted it. :? Busted it in half, but i got some good glue, and you cant see it unless your up close. I found new side markers for like $18, so i dont know if i should buy a new one. I should of did it the proper way.
Rob
Rob
I also made my side markers clear today. It looks real good except for the one I had to glue together, because i accidently busted it. :? Busted it in half, but i got some good glue, and you cant see it unless your up close. I found new side markers for like $18, so i dont know if i should buy a new one. I should of did it the proper way.
Rob
Thread
Thread Starter
Forum
Replies
Last Post
ssewannabe
Everything Electrical & Electronic
9
04-15-2007 08:25 PM
enmityst
Your Ride: GM Pictures & Videos
3
04-04-2004 08:43 AM