3800?
05-18-2007, 05:01 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Apr 2007
Location: republic, mo
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
3800?
http://www.chrfab.com/projects.htm
Check out right before the corvette and tell me that is not a 3800
Check out right before the corvette and tell me that is not a 3800
05-18-2007, 05:43 PM
#4
Junior Member
Posts like a Ricer Type-R
Looking at the port spacing, I'd say that may very well be an aftermarket aluminum 3800 (GN) setup. RWD has the oil filter in a different location.
Look at the uneven exhaust port spacing. That'* the first thing to look for in a GN or Turbo Regal.
Look at the uneven exhaust port spacing. That'* the first thing to look for in a GN or Turbo Regal.
05-18-2007, 10:01 PM
#6
Member
Posts like a V-Tak
Join Date: Mar 2007
Location: ATL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
it cant be notice the valvers there 4-bolt no 3800 cylinder head has a 4-bolt valve cover config it has to be a GN motor and if im correct i think someone does make a aluminum head and block for the grand nationals hell they have alot more then we do at the moment but 3800 heads.........naw
05-18-2007, 10:46 PM
#8
Junior Member
Posts like a Ricer Type-R
Originally Posted by 91parkave
it cant be notice the valvers there 4-bolt no 3800 cylinder head has a 4-bolt valve cover config it has to be a GN motor and if im correct i think someone does make a aluminum head and block for the grand nationals H*** they have alot more then we do at the moment but 3800 heads.........naw
Thread
Thread Starter
Forum
Replies
Last Post
cricha27
General GM Chat
3
05-04-2010 01:25 AM
ColorMeBadd2
Performance, Brainstorming & Tuning
3
11-19-2006 01:48 AM