General GM Chat When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made. Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

boost problem?

Thread Tools
 
Search this Thread
 
Old 02-11-2004, 09:56 AM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
superman013's Avatar
 
Join Date: Dec 2003
Location: round lake beach illinois
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
superman013 is on a distinguished road
Default boost problem?

i did a tune up on the ssei. it ran very good for about 70 miles. i was on the e-way when i noticed whenever i get the boost up to 0 it would start putting and jerking. i let off just a little so it goes just under 0 and its fine again. it seems to only happen when i get to 0 on the boost guage, or when i go to pass. i tried flooring it and it putted, jerked, then would be ok for a split second then putt, jerk, then ok. can anyone give me clue as to where the problem might be?
Old 02-11-2004, 09:59 AM
  #2  
Senior Member
Posts like a Northstar
 
con10der's Avatar
 
Join Date: Feb 2003
Location: Mount Vernon, Ohio
Posts: 530
Likes: 0
Received 0 Likes on 0 Posts
con10der is on a distinguished road
Default

seeing that you said you tuned it up...I would suspect improper plug gaping or wire problem first..Did it do this prior to the tune up??
Old 02-11-2004, 09:59 AM
  #3  
Sol
Senior Member
True Car Nut
 
Sol's Avatar
 
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes on 0 Posts
Sol is on a distinguished road
Default

Could the belt be slipping?
Old 02-11-2004, 10:11 AM
  #4  
Senior Member
Posts like a Turbo
 
Wolfedog50's Avatar
 
Join Date: Nov 2002
Location: Greenville, SC
Posts: 421
Likes: 0
Received 0 Likes on 0 Posts
Wolfedog50 is on a distinguished road
Default

Had the same thing happen to me. Mine was an ignition problem.
Old 02-11-2004, 10:51 AM
  #5  
Senior Member
Certified GM nut
 
DrJay's Avatar
 
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes on 0 Posts
DrJay is on a distinguished road
Default

Me and a buddy just went through a similar problem (granted it was a Porsche) and like con10der said, check out your plug gaps. If they're just barely close enough after a little bit when the resistance rises it'll become just barely too far. Also like he said, check the wires. We had to build my buddies ourself but after spending a few minutes trying to figure out why one of the wires wasen't sending juice I started thinking about how many defective wires go out every day.
Old 02-11-2004, 12:07 PM
  #6  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

I'll third the motion. Ignition. Even too close a gap can cause this. It has nothing to do with boost. I bet if you had a scantool on there, your O2 would be reading normal until it starts. Then it'll go rich for the unburnt fuel from the lack of spark.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
immusicman
Forced Induction
12
09-27-2009 12:05 AM
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM
DanCulkin
Performance, Brainstorming & Tuning
14
07-02-2007 11:02 AM
hvactech
Performance, Brainstorming & Tuning
12
05-10-2005 10:14 PM
Red Baron
Forced Induction
19
07-23-2003 07:50 PM



Quick Reply: boost problem?



All times are GMT -4. The time now is 06:56 AM.