NOWWW!!!!!
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
did yours fall off or are you replacing it? it is located down near the dampener, there is a two wire connector to remove first. I think I have a pic somewhere...I'll look.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PontiacDad
did yours fall off or are you replacing it? it is located down near the dampener, there is a two wire connector to remove first. I think I have a pic somewhere...I'll look.
#4
Senior Member
True Car Nut
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
I had the local dealer install mine. You gotta take off the passenger side tire, then get the harmonic balancer off (PAIN!). Mine was stuck very well.
#6
Senior Member
True Car Nut
Join Date: Dec 2003
Location: Corn Fields, IN
Posts: 2,767
Likes: 0
Received 0 Likes
on
0 Posts
Just to be sure--the ECM gives the same code for the crank sensor and the cam sensor. Are you sure its the crank? The cam sensor is a cinch to replace and i'd start there, unless your symptoms say its the crank.
#7
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by John Deere Boy
Just to be sure--the ECM gives the same code for the crank sensor and the cam sensor. Are you sure its the crank? The cam sensor is a cinch to replace and i'd start there, unless your symptoms say its the crank.
#9
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sse1990
I had the garage do it, I started to attempt it nad seen how much of a PITA it was going to be as a driveway repair.