SOOOO pissed!.!.!.
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
SOOOO pissed!.!.!.
about 4 hours ago, I was finally getting my upper back on, all lined up, gasket surfaces clean, etc etc. Well I start bolting it down. First 2 bolts the torqure wrench clicks for 15N*M (11ft-lbs) then I get to the 3rd, doesn't click, pull a little bit more to see if it will click...POP... UIM cracks. ()&*&(^*(#$&*(&@#_@# So now I have a shitty torque wrench which I spent 100 on earlier this week, a cracked UIM, and little hope of getting the car driveable so that my parents can have my brakes fixed before I come home for X-mas...
son of a b*(&#&@$
this stuff never goes my way. (on top of all that my oil pan still leaks...)
son of a b*(&#&@$
this stuff never goes my way. (on top of all that my oil pan still leaks...)
#4
Senior Member
Certified Car Nut
Join Date: Jul 2003
Location: Robbinsdale, MN
Posts: 15,408
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by corvettecrazy
Originally Posted by BillBoost37
the oil filter thingy wingy leaking
Sorry to hear about the mess you got going. Sounds kinda like my usual luck.
#6
Guest
Posts: n/a
Originally Posted by BillBoost37
Sorry to hear... Don and i were talking and think it'* the oil filter thingy wingy leaking
Sorry to hear about the intake tho... When I installed mine I did it in a random pattern and used a Nut driver... I wanted to make sure it wasn't much more than hand tight... as it said overtightening could crack the Upper intake...
Was the intake you had a Dorman?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jr's3800
Originally Posted by BillBoost37
Sorry to hear... Don and i were talking and think it'* the oil filter thingy wingy leaking
Sorry to hear about the intake tho... When I installed mine I did it in a random pattern and used a Nut driver... I wanted to make sure it wasn't much more than hand tight... as it said overtightening could crack the Upper intake...
Was the intake you had a Dorman?
I followed the FSM pattern.
Yeah it was a dorman(gmparts diect), It wasn't new for this week, but the gasket was new.
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chasesmith
That sucks man, what kind of torque wrench was it??