Will a 95 SLE exhaust manifold fit on my 99 SLE?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Will a 95 SLE exhaust manifold fit on my 99 SLE?
erics00ls is trying to sell some exhaust manifolds, and I'm interested in them for porting, but only if they'll fit. In his For Sale section thread, an incompatibility issue was brought up. Is it just a simple change to make them fit, though?
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Not a mechanical problem. Moved to General Chat.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying to figure out the difference between the 95 NA EMs from the 99 NA EMs that my SLE has right now.
That is correct, sir.
That'* why I'm wearing your rear end, now....
I figured it would be easier for me to keep the 99 SLE as a daily driver, buy the 95 EMs, port them, and do a swap. Because of the above quotes, I figured I'd ask why I couldn't. Also, I'm over at 1337ssei'* house, and we're trying to remove his fallen apart wheel speed sensor from his steering knuckle. It seems we were both eying these EMs, but he has a 97 SSEi. What would have to be changed for these to fit?
Originally Posted by jr's3800
The Rear manifold is particular to the 95-96 3800 Series II H and C Body iirc
Originally Posted by lash
Originally Posted by jr's3800
The Rear manifold is particular to the 95-96 3800 Series II H and C Body iirc
That'* why I'm wearing your rear end, now....
#6
Junior Member
Posts like a Ricer Type-R
I would personally listen to jr's3800'* advice in that For Sale topic.
Your post in 92-99 wasn't about a mechanical problem which is why it belongs in General Chat. You don't have a PROBLEM with your manifolds. Or any other mechancial problem that anyone is aware of by your posts.
Please read the Forum descriptions.
As far as the manifolds fitting, that'* a general question that has been answered by Don. I suggest you quote his reply and see if anyone disagrees or agrees.
Your post in 92-99 wasn't about a mechanical problem which is why it belongs in General Chat. You don't have a PROBLEM with your manifolds. Or any other mechancial problem that anyone is aware of by your posts.
Please read the Forum descriptions.
As far as the manifolds fitting, that'* a general question that has been answered by Don. I suggest you quote his reply and see if anyone disagrees or agrees.
Thread
Thread Starter
Forum
Replies
Last Post
20Bonneville02
General GM Chat
5
12-29-2010 12:47 AM
Merlin 91/97
Performance, Brainstorming & Tuning
15
09-02-2005 07:19 AM
toxictelevision
Performance, Brainstorming & Tuning
3
02-23-2003 06:41 AM