L67 Gasket Kit
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2010
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
L67 Gasket Kit
Anyone have a good idea of where to get them. I need a bunch of various ones so it only makes sense to buy a whole kit. I saw ZZP had them. Just wondering if there are any other options? I have not heard great things about ZZP. Thanks fellas!
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2010
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
I would have to piece them out if I ran that way and that will be well over 200$$ I looked them up. Looks like a great company. I will use them for the GNSSEI (all rights reserved registered trademark owned by me) HAHAHA
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Depending on the gaskets we could give you suggestions. For example the lower conversion set is a good one and at Advance it'* lower cost than an oil pan gasket by itself.
A lot of people have issues with the ZZP SC garlocks sealing. I've found their valve cover gaskets to be a hard rubber that is unlike GM/Fel Pro'* and usually they are a tad undersized. That causes you to stretch them and they roll in the cover. Lim'* are supposedly GM'*..but even their rubber end seals fit funny. I know Intense gets theirs directly from GM.
A lot of people have issues with the ZZP SC garlocks sealing. I've found their valve cover gaskets to be a hard rubber that is unlike GM/Fel Pro'* and usually they are a tad undersized. That causes you to stretch them and they roll in the cover. Lim'* are supposedly GM'*..but even their rubber end seals fit funny. I know Intense gets theirs directly from GM.
Thread
Thread Starter
Forum
Replies
Last Post
agrazela
General GM Chat
0
03-03-2008 09:38 PM