Keyless Programing Problem - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat
GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat

Go Back   GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat > GM Technical Discussion and Questions > General GM Chat

General GM Chat Chat about all things GM (and related cars). Off-topic stuff should be in the Lounge, and all Model specific mechanical problems should be posted in the proper forum.

LinkBack Thread Tools Search this Thread
Old 05-04-2003, 11:50 PM   #1
Junior Member
Join Date: May 2003
Location: Cleveland
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
40thSSE97 is on a distinguished road
Default Keyless Programing Problem

I used some Info I fould floating around here On how to add a transmitter to a 97 Bonneville SSE. It involved jumpering pin 4 to 8 or somthing similar to that on the OBDII service port. This made the locks lock and I then pressed a button on each of the remotes including the new one, pulled the jumper and turned the ignition off. The new remote I bought works great but I cant get the old two to work anymore. I repeated the pin jump and tryed to learn them several times but had no luck. Is there a step I am missing or a trick to this. Before I started both the old remotes worked but the one had a the contact pads worn out and had press a few times to get it to work. I bought a new one on ebay with all the same ID numbers on back, So the way I saw It i'd just relearn the one old one and the new one and call it a day. Any help would be appreciated, I'd kinda like to have two working remotes again.


40thSSE97 is offline   Reply With Quote
Old 05-05-2003, 03:56 AM   #2
Senior Member
Posts like a 4 Banger
Join Date: Oct 2002
Location: Las Vegas, NV
Posts: 131
Thanks: 0
Thanked 0 Times in 0 Posts
NVSSEI is on a distinguished road

From the1997 Factory Service Manual.
I have used this with the same situation as you have and it worked for me.

1 Turn ignition switch "off"
2 Jumper DLC pin 8 to pin 4 Close all doors.
3 Turn ignition switch "on" Door locks cycle.
4 Press and hold lock and unlock buttons on one transmitter. After a 30 second delay the doors will lock and unlock.
5 To program extra transmitters, repeat step 4. Do not turn off ignition. If ignition is turned off the first transmitter will become inoperative.
6 Disconnect jumper from DLC

Hope this helps.
NVSSEI is offline   Reply With Quote

Similar Threads
Thread Thread Starter Forum Replies Last Post
programing 2004 se keyless entry remote mybonni2004 2000-2005 3 12-02-2007 08:53 PM
Keyless Entry programing for the 96-99 guys... Hans 1992-1999 2 10-03-2007 10:19 AM
keyless remote programing 1996 Bonneville Se spit Everything Electrical & Electronic 15 08-20-2007 07:41 AM
90-91 Factory RKE Programing shortstuf212559 1987-1991 2 04-02-2003 10:11 PM
"keyless" entry isn't so keyless anymore.. Custom88 General GM Chat 5 01-06-2003 12:45 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:47 AM.