Ignition wires
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2005
Location: Niagara Falls Ontario Canada
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Ignition wires
Has anyone ever used Taylor 8mm Spiro Pro Series wires on their car? Wondering how they fit and if you've noticed any difference on a L67?
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
there have been some members that have had major problems with the Taylors, some have gone through 3-4 sets and have not found a good set. BUT there have been others that have great times with the Taylors. I would stay away from the Taylors personally
you wont notice a difference in a set of wires, you only bring back performance that you have lost during the years
you wont notice a difference in a set of wires, you only bring back performance that you have lost during the years
#4
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2005
Location: Niagara Falls Ontario Canada
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Ya, I don't like the fact that I would have to crimp one end on to install. Factory crimps seems better to me for reliability. Thanks for the heads up guys!
#5
Junior Member
Posts like a Ricer Type-R
You don't have to crimp the ends if you buy them pre-made for our cars. Any of the Grand Prix sets are identical for ours.
www.zzperformance.com
www.grandprixstore.com
But I've had 3 bad sets. As stated, others have had good luck, but I'll never buy another set from them.
ANY premium wire from the local store, other than Bosch.
www.zzperformance.com
www.grandprixstore.com
But I've had 3 bad sets. As stated, others have had good luck, but I'll never buy another set from them.
ANY premium wire from the local store, other than Bosch.
#8
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2005
Location: Niagara Falls Ontario Canada
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
As per my "holy gopher post" I notice 2 of my wires in the front were chewed through to the core thus the need for replacement. I have a set of acdelco 8mm on it now so I think I'll get another set from the local dealer! Thanks for all your remarks!
#10
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
I got Taylor Wires.....Still in the box.....Bought'em aboiut 5 mo ago....but still waiting to get the coils I want to run with them. Should be tommroow then I'll put'em on.