Is there any way to change the ECC?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
Is there any way to change the ECC?
I want the 94-99. I don't like the way the 97-93'* are. Wtht the 94-99, you can switch the vent modes much better than the one I have. When I had the 97, I can change the thing to vent, vent/floor, defrost.floor, defrost, defog. This one I have now, you only have the option for defost and floor. Unless you drop the temp to abput60* then you can use other positions. Thats not rightt. I was awondering if i can switch the units.
#4
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Twister97
That dont make sense. :?
Its a difference in the way the 87-83 ECC works and the 94-99'*. Its easy and hard to explain. I tried to do that and its confusing.
#5
Senior Member
True Car Nut
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ssesc93
Originally Posted by Twister97
That dont make sense. :?
Its a difference in the way the 87-83 ECC works and the 94-99'*. Its easy and hard to explain. I tried to do that and its confusing.
#7
Senior Member
True Car Nut
This is a really good topic 'cause I'd like to do the same. I can almost guarnetee that it will not be plug and play but I can do some research. My guess is that you would need at least the ECC head and the HVAC programmer. If anyone has a diagram of the climate control having the mode button, I'd like to take a look at it.
#8
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ssesc93
I edited. I thought I put 87-93 and 94-99.
#9
Junior Member
Posts like a Ricer Type-R
That'* correct. There are alot of differences in the 92/93 ECC and 94/95. This may also include HVAC controller work. Plan on pulling the entire interior front half of the car, and tearing into everything.
#10
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
That'* correct. There are alot of differences in the 92/93 ECC and 94/95. This may also include HVAC controller work. Plan on pulling the entire interior front half of the car, and tearing into everything.
If you were to change these out, wouldn't you have to change just the programmer with it, or would there be more?