Need bolt location help.
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
Need bolt location help.
Ok,So I am retarded and I went home to work on the bonnevilles and forgot the manuals in rochester. I need to know what needs to come off and the bolt locations to remove the entire center console. If someone has pictures of this, or just general guidelines, it would be very helpful. Thanks.
#2
Senior Member
True Car Nut
Remove shifter handle
Remove ashtray and remove two 7mm screws
Flip trim up (gray part) and remove four 10mm bolts
Remove bottom access panel in bin and remove two 10mm nuts
Remove the wire thingy that holds the front together
Disconnect all wiring
Slide console back and lift up
Enjoy beer
Remove ashtray and remove two 7mm screws
Flip trim up (gray part) and remove four 10mm bolts
Remove bottom access panel in bin and remove two 10mm nuts
Remove the wire thingy that holds the front together
Disconnect all wiring
Slide console back and lift up
Enjoy beer
#3
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
Instructions are on the mark, just did this to repair my bezel. Had 4 places where the plastic was busted up including the release button. Found all the pieces and repaired. The best part was I tore the console to basic pieces and cleaned. It now looks like new, all clean and shiny.
Thanks to randman for his help and parts.
2 hrs after I emailed gmpd to cancel my bezel order they emailed back and said it was shipped. It was ordered on the 18th. Hadn't heard a word from them till I tried to cancel. Haven't seen the part.
Thread
Thread Starter
Forum
Replies
Last Post
88bonnsse
Detailing & Appearance
13
02-27-2007 12:51 PM
LuvmySse
Performance, Brainstorming & Tuning
4
11-02-2006 01:01 PM