Getting started on my spring project.
#92
Administratus Emeritus
Certified Car Nut
Lookin purdy, going to chrome paint it ? Is that a stress crack in the last pic of the snout circumcise???
Last edited by GXP Venom; 02-26-2009 at 08:36 PM.
#96
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
No, it wont. I will need to port match the throttle body, I will get this to be a perfect match. Then I will need to trim the gasket to match. Toddster is going to the salvage yard today, I'm hopping he will find a different TB without the center MAF post. Then use a MAF from a V8. Going to take a little tuning.
#97
Okie Hokie
Posts like a Camaro
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
#98
DINOSAURUS BOOSTUS
Expert Gearhead
It'* actually easy TL.. When I tossed on the Northstar TB and truck MAF, it'* a simple table update, then when you have time...retune the computer.
Dan, why would you keep the stock TB size inlet and go with a bigger maf?
Dan, why would you keep the stock TB size inlet and go with a bigger maf?