What Are Your Spring Plans?
#1
Senior Member
Expert Gearhead
Thread Starter
What Are Your Spring Plans?
Well, for me, its shaping up to be an impressive list
4 Tires -paid
4 Chrome rims -paid
ELC sensor -paid
Driver side headlamp assembly -paid
Foglamp -paid
Side marker lights (they all burnt out on my passenger side
Alignment -ugh I need that so bad!
Slotted Rotors (fronts)
Ceramic Pads (fronts)
What are your plans?
4 Tires -paid
4 Chrome rims -paid
ELC sensor -paid
Driver side headlamp assembly -paid
Foglamp -paid
Side marker lights (they all burnt out on my passenger side
Alignment -ugh I need that so bad!
Slotted Rotors (fronts)
Ceramic Pads (fronts)
What are your plans?
#2
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Racine Wi
Posts: 5,146
Likes: 0
Received 0 Likes
on
0 Posts
Flip down montier
fix the common L27 oil leak
tie rods
ball joint
fix my HUD
fix the power door locks
get a flowmaster 80 series and leave stock tips in place
work work work
fix the common L27 oil leak
tie rods
ball joint
fix my HUD
fix the power door locks
get a flowmaster 80 series and leave stock tips in place
work work work
#4
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Toronto, Ontario, Canada
Posts: 5,158
Likes: 0
Received 0 Likes
on
0 Posts
... new tires, maybe...
... it'* all day to day, no plans really. If I can get my dad to sell it and get a Cressida, that would be nice.
... it'* all day to day, no plans really. If I can get my dad to sell it and get a Cressida, that would be nice.
#5
Senior Member
Certified GM nut
Join Date: Feb 2004
Posts: 1,631
Likes: 0
Received 0 Likes
on
0 Posts
Remove the resonator ( the flowmaster sounds great at idle, but can't hardly hear it otherwise,)
CAI,
MSD coil packs,
tint windows,
Update the Audio system.
(just added to list)
LSD from D.P.
Chip from D.P.
Looking into new throttle body from D.P.
CAI,
MSD coil packs,
tint windows,
Update the Audio system.
(just added to list)
LSD from D.P.
Chip from D.P.
Looking into new throttle body from D.P.
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
The list;
1) install neons.
2) Tranny flush.
3) Rad flush.
4) Solid engine motor mount, built ready to install.
5) install radar detector, paid for not recvd.
6) cold air intake, waiting for Ty.
7) PCM, soon to be ordered.
Hood insulator clean and graphics.
9) Custom ELC override, in the works.
10) Replace passenger rear Window regulator, have parts.
11) Remove dealership badges, soon need heat gun.
12) Angel eye fog lights, hopefully for my bday.
13) is bad luck
14) Good over all detail of engine bay, custom wire looms and vacum lines.
15) more exhaust work, remove cat and res?
16) LSD, if income tax return is healthy.
17) New windshield, very soon. Through insurance.
A few other things but this covers the main list. I've started a good cleaning today already and may get to a few things later tonite.
1) install neons.
2) Tranny flush.
3) Rad flush.
4) Solid engine motor mount, built ready to install.
5) install radar detector, paid for not recvd.
6) cold air intake, waiting for Ty.
7) PCM, soon to be ordered.
Hood insulator clean and graphics.
9) Custom ELC override, in the works.
10) Replace passenger rear Window regulator, have parts.
11) Remove dealership badges, soon need heat gun.
12) Angel eye fog lights, hopefully for my bday.
13) is bad luck
14) Good over all detail of engine bay, custom wire looms and vacum lines.
15) more exhaust work, remove cat and res?
16) LSD, if income tax return is healthy.
17) New windshield, very soon. Through insurance.
A few other things but this covers the main list. I've started a good cleaning today already and may get to a few things later tonite.
#8
Senior Member
Certified Car Nut
Jim you can do better then that.
CAI box (next weekend hopefully)
Install LED Vent lights (next weekend)
Pick up Donor L27 (next weekend) and hopefully not severing/rendering useless any limbs in the processes
Hrm....
Rip into Donor L27
P&P Donor Heads
P&P Donor Exhaust Manifolds
P&P Donor Intake manifolds
Figure out how to remove cam from Said donor
Get a custom regrind
Get custom length, lightweight Pushrods
(slap it all on my motor, keeping original parts).
Jet stage 2, or a custom burn for my modifications.
CAI box (next weekend hopefully)
Install LED Vent lights (next weekend)
Pick up Donor L27 (next weekend) and hopefully not severing/rendering useless any limbs in the processes
Hrm....
Rip into Donor L27
P&P Donor Heads
P&P Donor Exhaust Manifolds
P&P Donor Intake manifolds
Figure out how to remove cam from Said donor
Get a custom regrind
Get custom length, lightweight Pushrods
(slap it all on my motor, keeping original parts).
Jet stage 2, or a custom burn for my modifications.