conquering the rattle
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
conquering the rattle
this post got me thinking...
http://www.bonnevilleclub.com/forum/...082&highlight=
so i went at it...
went to home depot and $5.27 later got this...
i took off the trim piece and then i took out the 5 push in hold down thingers...
i took the 2 in foam and stuffed it inbetween the cover and plastic up thing... which was super loose!!
i also took out the bottom 4 push in connectors and put foam inbetween the two pieces
DID IT WORK???
oh of course!!
no need to take off the cover or anything... took me 20 min max...
want proof?
http://www.putfile.com/media.php?n=rattle_0001
http://www.bonnevilleclub.com/forum/...082&highlight=
so i went at it...
went to home depot and $5.27 later got this...
i took off the trim piece and then i took out the 5 push in hold down thingers...
i took the 2 in foam and stuffed it inbetween the cover and plastic up thing... which was super loose!!
i also took out the bottom 4 push in connectors and put foam inbetween the two pieces
DID IT WORK???
oh of course!!
no need to take off the cover or anything... took me 20 min max...
want proof?
http://www.putfile.com/media.php?n=rattle_0001
#2
Senior Member
True Car Nut
Very nice job, pal. I'm glad you didn't have to remove the cover. That saves some alignment time. Is the cover tighter now? You mentioned it was really loose.
#3
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by randman1
Very nice job, pal. I'm glad you didn't have to remove the cover. That saves some alignment time. Is the cover tighter now? You mentioned it was really loose.
almost starting to bubble up cuz the foam is pushing up...
#6
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by randman1
A little too thick maybe?
the foam WILL wear out... get wet.. fall out...ya know how it goes..
Thread
Thread Starter
Forum
Replies
Last Post