O2 sensor and the plug wire
08-01-2007, 12:08 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: NorthWest WI
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensor and the plug wire
95 Bonni SE L36
I just put in a new AC Delco O2 sensor and there just doesn't seem to be any way to keep the wire harness more than 3/4" away from the spark plug wire.
When I did the plug wires a few months ago I ended up using zip ties on that one plug wire to keep it away from the O2 sensor wire harness. I thought I could re-route the new one but the harness is just too short. I did try to form the harness wire away. 3/4" is the best it will stay untouched.
Web sites I've read say keep it a couple inches away.....yeah right!
Is everybodys L36 this way?
I just put in a new AC Delco O2 sensor and there just doesn't seem to be any way to keep the wire harness more than 3/4" away from the spark plug wire.
When I did the plug wires a few months ago I ended up using zip ties on that one plug wire to keep it away from the O2 sensor wire harness. I thought I could re-route the new one but the harness is just too short. I did try to form the harness wire away. 3/4" is the best it will stay untouched.
Web sites I've read say keep it a couple inches away.....yeah right!
Is everybodys L36 this way?
08-01-2007, 12:37 PM
#2
Senior Member
Posts like a Turbo
Join Date: Apr 2007
Location: Sellersville, PA
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Re: O2 sensor and the plug wire
Originally Posted by Lee_Mur
95 Bonni SE L36
I just put in a new AC Delco O2 sensor and there just doesn't seem to be any way to keep the wire harness more than 3/4" away from the spark plug wire.
When I did the plug wires a few months ago I ended up using zip ties on that one plug wire to keep it away from the O2 sensor wire harness. I thought I could re-route the new one but the harness is just too short. I did try to form the harness wire away. 3/4" is the best it will stay untouched.
Web sites I've read say keep it a couple inches away.....yeah right!
Is everybodys L36 this way?
I just put in a new AC Delco O2 sensor and there just doesn't seem to be any way to keep the wire harness more than 3/4" away from the spark plug wire.
When I did the plug wires a few months ago I ended up using zip ties on that one plug wire to keep it away from the O2 sensor wire harness. I thought I could re-route the new one but the harness is just too short. I did try to form the harness wire away. 3/4" is the best it will stay untouched.
Web sites I've read say keep it a couple inches away.....yeah right!
Is everybodys L36 this way?
08-01-2007, 01:05 PM
#3
DINOSAURUS BOOSTUS
Expert Gearhead
the length of wires etc is prohibitive. I find that most have the wire coming down in the last holder and looping around the outside of the O2.
3/4" is about the best you can do.
3/4" is about the best you can do.
Thread
Thread Starter
Forum
Replies
Last Post
