firing order >?
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2007
Location: hudson nh
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
firing order >?
hey i was just wondering what was the firing order on the l67 i wasnt thinking and took my plug wires off with out marking them thanks
#5
Tech'l. Ted: I used your illustration this weekend in replacing wires. The one time i had two wires disconnected is when I screwed up, and O'Reilly'* did not have the cyl. no'*. available. That'* when i found this site. Very nice labeled photo you posted. I was just curious as to what the round diaphragm looking device is in the line in front of the SC. My wife'* '99 doesn't have that, so i assume it is something after-market?
Thanks for the photo anyway!
Thanks for the photo anyway!
#8
BillBoost: I have just now logged on here again since posting that Q.
Interesting concept about the anti-vib. cannister (dampener?).
Is the concern about the vibration more about effect on fuel flow, or effect on lines themselves, such as welds, or ?
Like your Admin. buddy, I am much more adept at polishing than tinkering/tuning, but am just curious, what is the benefit of reduction of vibration by the canister? Thanks.
Interesting concept about the anti-vib. cannister (dampener?).
Is the concern about the vibration more about effect on fuel flow, or effect on lines themselves, such as welds, or ?
Like your Admin. buddy, I am much more adept at polishing than tinkering/tuning, but am just curious, what is the benefit of reduction of vibration by the canister? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post