LED
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2003
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
LED
Anybody else figure out changing things out with LED'* in their car? I just finished changing out my above-the-lock-and-window-switch light with a brighter red one anybody else had any ideas that are easy to do with LEDs and look good? cause ive got every color of LED layin around in quantities of 10.. lol I NEEED TO USE THEM, gimme ideas...
#2
Junior Member
Posts like a Ricer Type-R
I sent Jr a few of the best HP has to offer awhile back. Dunno if he used 'em or not, but I think he was going to use them on his OLD bonneville. The one with DUST all over it. The SLOW one.
#3
Senior Member
Posts like a Turbo
Join Date: Mar 2003
Location: Montana
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
make a rainbow-like picture with all the different colors and mount them in your grill sorta like night rider!
Ha, no....try to get the led'* to work for the tail lights!
Ha, no....try to get the led'* to work for the tail lights!
#4
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2003
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
I thought about putting LEDs in my third brake light to move when i turn my turn signal on, motion = kewl.. And i was thinking putting some in my vents using red, blue and green to make and fade to any color i want
#5
Junior Member
Posts like a Ricer Type-R
If you have the light monitor, you'll have to create a whole new circuit for the led'* (when replacing existing lamps). Otherwise that stupid display will go nuts on you.
The aftermarket led 1157'* for the brakes might work if tricked with a resistor. Haven't tried it yet.
The aftermarket led 1157'* for the brakes might work if tricked with a resistor. Haven't tried it yet.
#6
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2003
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
I dun have a monitor, so that wouldnt be a prob. I was thinking LED for all turns, but i dont have the money for the tails (cause i cant make those)
#8
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2003
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Yeah ive got some 1000+ MCD led'* to put for mood/accent but im not sure what colors to use, red inside , blue out or sumthin, i duunno, too many choices