Blazertech Foglights................bulb blew out
03-12-2003, 09:58 AM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2002
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Blazertech Foglights................bulb blew out
Hey,
Last night my driver side bulb went out. I wanted to know how easy it would be to replace it. I took a quick look at the foglight fixture and it looks like a B*#ch the get into. I was wondering if anyone could give me some instruction of how to do this. I had them installed at a local custom shop around my house and if anything I could take it there but of course if I could do it myself I will. Any help would be appreciated.
Ridic
2001 Silver Bonneville SE
Last night my driver side bulb went out. I wanted to know how easy it would be to replace it. I took a quick look at the foglight fixture and it looks like a B*#ch the get into. I was wondering if anyone could give me some instruction of how to do this. I had them installed at a local custom shop around my house and if anything I could take it there but of course if I could do it myself I will. Any help would be appreciated.
Ridic
2001 Silver Bonneville SE
03-16-2003, 01:26 PM
#2
Senior Member
Posts like a 4 Banger
Join Date: Mar 2003
Location: Oshkosh, WI
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
I sold many of these, so I know them very well, once you get the fog assembly out, pull the rubber boot from the back of the light, and inside there will be a phillips screw to take out and then the H3 bulb comes right out and you put it back together the way you got it apart, use some grease on the rubber boot when you put it back together and the bulb will be sealed from everything
Thread
Thread Starter
Forum
Replies
Last Post
88bonnsse
Everything Electrical & Electronic
11
07-06-2007 01:44 PM