heads from the 93 and bolt them right up on mine...
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
heads from the 93 and bolt them right up on mine...
Originally Posted by BillBoost37
Originally Posted by bandit
MMmmmMmmm those rockers look good....
so how hard is it to replace them so i can stop my stupid ticking!!!?
so how hard is it to replace them so i can stop my stupid ticking!!!?
Originally Posted by BillBoost37
Originally Posted by Mortehl
Stop me if I'm wrong, but couldn't bandit just take the heads from the 93 and bolt them right up? With new gaskets of course.
The question could be better answered if specifically addressed
So can i, :?: this is off the parts car at bills house.
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
#5
Junior Member
Posts like a Ricer Type-R
Originally Posted by 1993 SLE
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
#6
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Originally Posted by 1993 SLE
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
cool awsome, cuz i think that is my ticking problem i have that i know everyone herd while at NEBF
#9
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
And you are pretty sure swapping heads is going to fix that up?
i have a Valve tap Knock.... isn't that usly a bad pushrod or lifter of rocker?