Anyone think of parts they will need?
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
Anyone think of parts they will need?
I am going to the junkyard monday morning to pick up a couple parts for a member and was wondering if anyone else needed anything? Unfortunately, I don't have a lot of time, but I will try. There are some pictures here: http://bizio.homeftp.org/geoff/bc/Junkyard4-15-2006/ of some of the cars there.
Notable cars are as follows:
1994 Green/tan SSE - very highly optioned, HUD, AL7, CCR, two perfect inner tails. Body decent, dash/console messed up
1997ish SLE - purple-ish, HARD front hit, 7 band CD dented up good though.
1993 SSEi - White/tan, RUSTY, no bumpers, AL7'*, no PCM, 3 ok tails (centers + driver)
1991 SSE - White/grey. No cluster, seats bad, no washer bottle or passeger door panel (already with Frankie)
1997/98 GTP - 2 dr, green/grey Engine Fire.
Numerous SE'*
These are in 2 yards. all but the SSEi are in one. The newer SE'* are with the SSEi. Looks at the pictures. Will check this tomorrow. I don't have a lot of extra money, so i pay for what I can, but if you post here, there is no backing out on me. got too many parts lying around as it is
Notable cars are as follows:
1994 Green/tan SSE - very highly optioned, HUD, AL7, CCR, two perfect inner tails. Body decent, dash/console messed up
1997ish SLE - purple-ish, HARD front hit, 7 band CD dented up good though.
1993 SSEi - White/tan, RUSTY, no bumpers, AL7'*, no PCM, 3 ok tails (centers + driver)
1991 SSE - White/grey. No cluster, seats bad, no washer bottle or passeger door panel (already with Frankie)
1997/98 GTP - 2 dr, green/grey Engine Fire.
Numerous SE'*
These are in 2 yards. all but the SSEi are in one. The newer SE'* are with the SSEi. Looks at the pictures. Will check this tomorrow. I don't have a lot of extra money, so i pay for what I can, but if you post here, there is no backing out on me. got too many parts lying around as it is
#3
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
yes, if you can get me a outer tail from a SSEi 92-95, it can be crack Delamed, and so on, doesn't need to be in good shap, im going to use it for a test one. if you can get it for under $20 if in really good shape or under $15 if in ok shape and under $10 if in bad shape...
im going to try to make something to take them apart with out delaming them so i can do mine...
im going to try to make something to take them apart with out delaming them so i can do mine...
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
I've been doing this for a while for members. You can consider me the original Bill Boost (I got him started )
I got about half the parts I need to make a car sitting here at my apartment, most of a parts car at my parents as well as other odds and ends I've picked up.
I got about half the parts I need to make a car sitting here at my apartment, most of a parts car at my parents as well as other odds and ends I've picked up.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
Driver'* outer is still there, Unsure what they'll want for it, but more than $20 I am fairly sure.
Grille is toast.
Inners will be yours with first dibs. Not sure on the price of them, but hopefully not more than $50 for the set (just a guess, the yards here are higher on prices than binghamton)
Visors I will do my best on.
Grille is toast.
Inners will be yours with first dibs. Not sure on the price of them, but hopefully not more than $50 for the set (just a guess, the yards here are higher on prices than binghamton)
Visors I will do my best on.
#9
I can go for the two inners and the driver side outer they dont need to be perfect as long as there in NO delam on the lower section (tinting the top) and if they are perfect you wouldnt have to worry about me tinting MINT tails because i would just do the ones i already have
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
Elmo - Any SE grill? cause that'* all there are i believe. Might have one in your color, I can possibly check.
The three tail lights - The delam was just the tops if I recall correctly. I'll have to look to double check. Those I might get pictures and a price on and go back and get them later just cause they might be a decent amount. I'll see for ya.
The three tail lights - The delam was just the tops if I recall correctly. I'll have to look to double check. Those I might get pictures and a price on and go back and get them later just cause they might be a decent amount. I'll see for ya.