jerky acceleration...what did i do!!
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
jerky acceleration...what did i do!!
i washed my car about a week ago, and since then i have had really jerky acceleration, but only at WOT. i washed off the engine with the power washer, not anymore or any less than normal. there is no water in the airbox. what else would cause this, or is it just a coincidence that it started happening at the exact same time i washed the engine
#6
Senior Member
Certified Car Nut
It'* the ribbon like set of cables that goes into the bottom of the coil pack mount. Use WD-40 on your plug wires, it displaces water. Otherwise take the wires out of both ends, and let them dry, and maybe pull the coil packs off and let dry.
#7
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by harofreak00
can someone define ICM connector for me?
i know everything else, and ill let it dry out while i work on something else.
i know everything else, and ill let it dry out while i work on something else.
Thread
Thread Starter
Forum
Replies
Last Post