How to make Euro Tails for 92-95's
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
How to make Euro Tails for 92-95'*
1. Go get a set of SSE tails. The ones with the black lines.
2. heat them with the blowdryer.
3. Pry it apart, this part takes two people to pry in the right spots.
4. throw away the red insert.
5. break out the little black lines inside the clear part.
6. you may want to repaint the chrome on, the chrome in my reverse light spot looks rusted, only white.
7. heat the tar lookin stuff back up with the hair dryer, and stick it back together.
2. heat them with the blowdryer.
3. Pry it apart, this part takes two people to pry in the right spots.
4. throw away the red insert.
5. break out the little black lines inside the clear part.
6. you may want to repaint the chrome on, the chrome in my reverse light spot looks rusted, only white.
7. heat the tar lookin stuff back up with the hair dryer, and stick it back together.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
BTW, I had mine apart, but I did not rice them. I had a crack along the seam and decided to pull it apart to get the moisture and water deposits out.
#6
Thanks Dame, JKW did this to his SSE SC? looks pretty good, check out his page under his sig when U get a chance, also Bonne ninety four SSE did this as well, except he just covered the orange part up insted of taking the whole thing out, looks good either way.
#7
Senior Member
Posts like a Turbo
Join Date: Mar 2003
Location: vancouver, canada 1995 bonneville SSEi
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mista_sse
JKW did this to his SSE SC?
http://www.bonnevilleclub.com/forum/...ic.php?t=5947&
#10
Senior Member
Certified Car Nut
Originally Posted by aukc
Originally Posted by mista_sse
JKW did this to his SSE SC?
http://www.bonnevilleclub.com/forum/...ic.php?t=5947&