3.5" Idler pulley part number
#11
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
I must have missed the Tech info part
Thanks guys, Im working with Haro now on maybe getting the one he has.
Thanks guys, Im working with Haro now on maybe getting the one he has.
#12
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Just a FYI.. i just look up the tech info part # for the 3.5" (38020) and went to advances web site. does not match anything.
Part#:38020 is that only a NAPA part #?
-----
edit. everything at advance and Dayco'* website is in mm not inches
Part#:38020 is that only a NAPA part #?
-----
edit. everything at advance and Dayco'* website is in mm not inches
#13
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Ok got the pulley.
90 millimeters = 3.54330709 inch
Dayco - Advance auto #: 89018
90 millimeters = 3.54330709 inch
Dayco - Advance auto #: 89018
#14
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bandit
Ok got the pulley.
90 millimeters = 3.54330709 inch
Dayco - Advance auto #: 89018
90 millimeters = 3.54330709 inch
Dayco - Advance auto #: 89018
Rubs a little on the inside...
#16
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Rubs on the half circle edge that sticks out around the center shaft...
Im going to see if i can find the metal one.
That NAPA Part number. I Had Advance cross reference it.. It comes up with one that is 3.5" BUT.... the center hole is to small for the shaft.
Im going to see if i can find the metal one.
That NAPA Part number. I Had Advance cross reference it.. It comes up with one that is 3.5" BUT.... the center hole is to small for the shaft.
#18
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
I need a new belt anyway... so maybe. but then it will make it more of a PITA to swap Pulleys...
Hey if you want. Goto advance and look up the pulley i got, the one in techinfo and the Stock one and look at them.
Hey if you want. Goto advance and look up the pulley i got, the one in techinfo and the Stock one and look at them.