M62 Nose Drive Bearings
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
M62 Nose Drive Bearings
I read the posts that say the bearings for the nose drive are 6203.C3 and 6204.C3, but my bearing rep needs to know what brand they are... according to him the 6203 is of course standard size and duty rating, by\ut the C3 suffix can mean different things to different manufacturers... he said that *usually* .C3 means loose internal clearances (would that make sense for an application like the inside of a supercharger???) but some manufacturers use .C3 to indicate a composite (read plastic) ball cage - ostensibly to allow higher speeds and greater tolerance to accel/deceleration.
So if one of you guys could let me know the manufacturer that Eaton uses for these things, I'd really appreciate it.
thanks
So if one of you guys could let me know the manufacturer that Eaton uses for these things, I'd really appreciate it.
thanks
#2
Member
Posts like a V-Tak
Join Date: May 2003
Location: Knoxville, TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
NSK on the bearings, I bought mine from Motion Industries.
For specs:
http://www.nsk-corp.com/page.asp?ID=253
For specs:
http://www.nsk-corp.com/page.asp?ID=253
Thread
Thread Starter
Forum
Replies
Last Post