3.5 pulley . . .Is it worth it?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2008
Location: Philadelphia PA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
3.5 pulley . . .Is it worth it?
I just recently received my FWI from intense and I also just received my autolite 605'*. I have not done my PCM yet because honestly I will need a little guidance on the settings. I also have my exhaust opened up pretty good.
My question is . . will I get a noticeable difference if I change my pulley to a 3.5. Or would it make more sense to do the necessary upgrades to put on a 3.4 pulley. I don't really want to do a 3.4 because of the possible KR issues. Especially if there is a noticeable difference with the 3.5.
I'm really just looking for some opinions. Thanks
My question is . . will I get a noticeable difference if I change my pulley to a 3.5. Or would it make more sense to do the necessary upgrades to put on a 3.4 pulley. I don't really want to do a 3.4 because of the possible KR issues. Especially if there is a noticeable difference with the 3.5.
I'm really just looking for some opinions. Thanks
#2
Senior Member
True Car Nut
With the mods that you currently have, a 3.5 pulley will make for a noticeable difference. Until you can scan and re-tune to avoid KR, I wouldn't drop below a 3.5 at this time.
#5
Senior Member
True Car Nut
#9
Senior Member
True Car Nut
#10
Senior Member
True Car Nut
$500, that'* for personal use. It'* $650 for the pro set-up
HPTuners.com >> Performance At Your Fingertips
HPTuners.com >> Performance At Your Fingertips
I was kidding. I don't want it for personal use, I want it for my car. I am already a tuned machine.