Do I put GM Gasket Maker on both sides of my snout?
06-12-2009, 07:12 AM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Do I put GM Gasket Maker on both sides of my snout?
Do I seal both sides of my snout with gasket maker on the rotor side and the coupler side when I take it apart? Thanks
06-12-2009, 07:34 AM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
You won't need to. The tolerances of the machining is extremely good and only a very light amount is needed to add a sealing property to the metal. Undoubtedly some will ooze out of the casing and need to be wiped off.
Each time this happens to me, no matter how light I put it on.
Each time this happens to me, no matter how light I put it on.
Thread
Thread Starter
Forum
Replies
Last Post
Stage III
Audio (and aftermarket electronics)
4
02-07-2013 05:41 PM