'99 series 2 pulley change
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
'99 series 2 pulley change
I want to go with a 3.4 pulley. I know there are supporting mods to go with this and you have to have a special puller to remove it .
My question is: Since it is a press-on pulley,how is it reinstalled?????
My question is: Since it is a press-on pulley,how is it reinstalled?????
#2
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
You will want some other mods to go along with a 3.4 pulley, because typically on a stock L67 you will see KR. An intake, colder plugs, colder t-stat, and a reprogrammed computer should do a pretty good job of getting rid of that KR, exhaust mods aren't a bad idea either, but I wouldn't recommend putting one on a stock car. We put one on the Monte stock and it gets ~7kr. I'm sure you already know this, just thought I'd tell you anyways.
The pulley tool that you have to rent/buy to get the pulley off also is used to press it on. You just reverse the procedure. It will come with instructions and should be fairly self explanitory.
Shawn
The pulley tool that you have to rent/buy to get the pulley off also is used to press it on. You just reverse the procedure. It will come with instructions and should be fairly self explanitory.
Shawn
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM