Forced Induction All questions and problems regarding Superchargers, Turbos, NOS, ZEX, intercoolers, water injection, etc.

SC question???

Thread Tools
 
Search this Thread
 
Old 02-04-2008, 02:42 PM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
mustangman_93's Avatar
 
Join Date: Feb 2008
Location: INDIANAPOLIS, IN 46237
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
mustangman_93 is on a distinguished road
Default SC question???

mustangman_93
LE Member


Joined: 04 Feb 2008
Posts: 3
Location: INDIANAPOLIS, IN 46237
Posted: Mon Feb 04, 2008 2:40 pm Post subject: SC question???

--------------------------------------------------------------------------------

When the car is at idle it has a knocking sound, when I removed the SC belt the knocking sound went away. Put the SC belt back on and knocking sound returned at idle. When I increased the rpms the SC quieted down to where the knocking sound was inaudible. Turned the car off and removed SC belt again and moved the pulley back and forth and felt some "slop" both ways before feeling the SC catch. What could the problem be? Also, the knocking sound does not occur at start up and becomes much more frequent the longer car runs. It definitely sounds like a rod knocking, but eliminated that when bypassed the SC. Any help would be much appreciated. Thank you very much. Bryan
_________________
1996 Bonneville SSEI, bone stock, 193000 miles
Old 02-04-2008, 04:05 PM
  #2  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Replace the coupler.

www.rollingperformance.com
www.INTENSE-racing.com
www.zzperformance.com

Pick your poison. Sealant, two bottles of oil (supercharger oil only), and a coupler.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nagel79
Audio (and aftermarket electronics)
4
07-09-2006 10:14 AM
ten_gigahertz
2000-2005
15
03-11-2006 09:07 AM
satsuke
1992-1999
9
09-20-2005 08:28 PM
CraZyDriVer868
Audio (and aftermarket electronics)
4
10-31-2003 03:19 AM
dbtk2
2000-2005
3
05-21-2003 11:00 PM



Quick Reply: SC question???



All times are GMT -4. The time now is 04:37 AM.