Some questions..
#1
Senior Member
Certified Car Nut
Thread Starter
Some questions..
After reading some Techinfo, to remove a pulley I just need to take the allen off, and get a pulley/gear removal tool correct? Any other way to cheat around this at all?
#5
You can brace around the pulley and use a press to push the shaft also. Sorta the opposite of a pulley I guess you could say. Just make sure you put that nut on a few turns so you don't mess up the threads.
#6
Senior Member
Certified Car Nut
Thread Starter
got a strap wrench today, i'll attempt tomorrow morning.
So i'll have to push the shaft out with some good force? Would a clamp of some kind work for that on one side of the pulley, and the nut? There are 3 legged gear pullers at the store for $10...
It'* being sold to a 95 ssei owner, so the pulley is important to me
<Needs cash
So i'll have to push the shaft out with some good force? Would a clamp of some kind work for that on one side of the pulley, and the nut? There are 3 legged gear pullers at the store for $10...
It'* being sold to a 95 ssei owner, so the pulley is important to me
<Needs cash
#7
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonneMeMN
got a strap wrench today, i'll attempt tomorrow morning.
So i'll have to push the shaft out with some good force? Would a clamp of some kind work for that on one side of the pulley, and the nut? There are 3 legged gear pullers at the store for $10...
It'* being sold to a 95 ssei owner, so the pulley is important to me
<Needs cash
So i'll have to push the shaft out with some good force? Would a clamp of some kind work for that on one side of the pulley, and the nut? There are 3 legged gear pullers at the store for $10...
It'* being sold to a 95 ssei owner, so the pulley is important to me
<Needs cash
Thread
Thread Starter
Forum
Replies
Last Post
2000SilverBullet
Your Other Rides: Pics & Videos
6
07-02-2006 02:44 AM
Hailey
Performance, Brainstorming & Tuning
35
03-18-2004 11:39 AM
BonneMeMN
Performance, Brainstorming & Tuning
4
10-08-2003 10:31 AM