Need engine component layout for 93 SSEi
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2004
Location: CALEXICO, CA 92231
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Need engine component layout for 93 SSEi
Hi there! I'm desperately looking for ser4vice (shop) manuals for a 93 SSEi, or at least an engine diagram so I can find out where everything is located. The boost gauge in my car shows negative boost and I want to troubleshoot the whole SC system. Can't find the Boost Control and other parts.
Any ideas for a link to such a diagram? I appreciate it.
Any ideas for a link to such a diagram? I appreciate it.
#2
boost will be negative during idle, you should get about 7-8psi from WOT. during a normal acceleration it should be at about zero.
the circled part is the boost control sylanoid
the circled part is the boost control sylanoid
#3
Junior Member
Posts like a Ricer Type-R
I agree. Sounds normal to me, unless you can be more specific. You also won't see boost unless you're in a drive gear. Revving at idle won't do much. It'll bypass based on PCM command.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2004
Location: CALEXICO, CA 92231
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
OK! So that'* the solenoid! Now, isn't there also some kind of other bypass/blowoff valve as well in the system?
Thanks for your help.
Thanks for your help.
#9
Senior Member
Posts like a Turbo
Join Date: Jul 2003
Location: Boston Area
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
I was wondering, are those good-and-plenty candies you have stuck in those vacuum lines???
And Will, the SC is bypassed at idle? That must be why you can start and idle with no SC belt.
And Will, the SC is bypassed at idle? That must be why you can start and idle with no SC belt.