Need info from 94 or 95 SC owners.
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Need info from 94 or 95 SC owners.
I need the dimensions of the SC outlet port on a 95/95 SC, as well as the inlet port diameter behind the throttle body. Pics would be appreciated.
I'm interested in the height and width of the triangular outlet port, as well as the vertical height before it turns towards the point on the TB end.
In addition, the overall diameter of each rotor chamber half, and the total inside width of the two combined.
I'm interested in the height and width of the triangular outlet port, as well as the vertical height before it turns towards the point on the TB end.
In addition, the overall diameter of each rotor chamber half, and the total inside width of the two combined.
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
John, I'd like pics of yours anyway, and dimensions. Next time you tear it down. Get some in/out closeups like I did on mine.
I have an idea for you
I have an idea for you
#9
Junior Member
Posts like a Ricer Type-R
Thread Starter
With a ruler! I need DIMENSIONS of the outlet port and inlet diameter. Pics also.
I'm increasing compression of the SC, and need to know the differences between the 92/93 and 94/95 inlet and outlet, in order to predict heat increases. I'm planning ahead for KR, and may need to increase my pulley size in order to make up for the increased efficiency of my blower.
I'm increasing compression of the SC, and need to know the differences between the 92/93 and 94/95 inlet and outlet, in order to predict heat increases. I'm planning ahead for KR, and may need to increase my pulley size in order to make up for the increased efficiency of my blower.
#10
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Gordy and I should be able to get you anything that you need to know involving this on Saturday.
Thread
Thread Starter
Forum
Replies
Last Post
macho_mike21
Performance, Brainstorming & Tuning
11
04-03-2004 02:33 PM