SC & LIM lil ID (56k, good luck )
10-10-2007, 10:26 PM
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
SC & LIM lil ID (56k, good luck )
i bought this m62 off ebay. the guy said he wasnt sure what year or even model it came off of. he was cool enuff to include the intake as well. and for $86, i was pretty happy.
but i think it is the 94-95. the casting # is 24502302. i remember reading a wren r&d thread with the part numbers, but i couldnt find it again.
heres some pics. out the box really dirty.
and after a quick wash
and there is a few marks on the nose, any suggestions on repair, or should i just replace the nose?
but i think it is the 94-95. the casting # is 24502302. i remember reading a wren r&d thread with the part numbers, but i couldnt find it again.
heres some pics. out the box really dirty.
and after a quick wash
and there is a few marks on the nose, any suggestions on repair, or should i just replace the nose?
10-10-2007, 10:45 PM
#3
Junior Member
Posts like a Ricer Type-R
That'* a 92/93.
Your nosedrive pic is blurry. Can't tell how bad the damage is.
What are your plans? What'* wrong with yours? What are you going to do about the bearings?
Why does your topic title say LIM?
Your nosedrive pic is blurry. Can't tell how bad the damage is.
What are your plans? What'* wrong with yours? What are you going to do about the bearings?
Why does your topic title say LIM?
10-10-2007, 11:09 PM
#4
Senior Member
Certified GM nut
Thread Starter
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by willwren
That'* a 92/93.
Your nosedrive pic is blurry. Can't tell how bad the damage is.
What are your plans? What'* wrong with yours? What are you going to do about the bearings?
Why does your topic title say LIM?
Your nosedrive pic is blurry. Can't tell how bad the damage is.
What are your plans? What'* wrong with yours? What are you going to do about the bearings?
Why does your topic title say LIM?
there is nothing wrong with mine. i just want to port and polish. and obviously dont want to use my one and only.
oh and i forgot to put sc in title. im gettin tired. fixed that. i was thinking the lim may help the id, but i ingeniously forgot to add those too.
10-11-2007, 09:05 AM
#5
DINOSAURUS BOOSTUS
Expert Gearhead
If the casing isn't compromised...only banged a bit..it should be fine. 
Can you get a pick inside the LIM for us. I'm wondering if it'* the WOB LIM.
Can you get a pick inside the LIM for us. I'm wondering if it'* the WOB LIM.
10-11-2007, 04:35 PM
#6
Senior Member
Certified GM nut
Thread Starter
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
idk what wop is but, heres some lim pics
and notice the plug. approx 3/8. on my gp there is a second cts (i think) there.what is that for?
do these #'* help id wop? there on that plate under the cts. and what is this plate?
heres some more of the nosedrive
and notice the plug. approx 3/8. on my gp there is a second cts (i think) there.what is that for?
do these #'* help id wop? there on that plate under the cts. and what is this plate?
heres some more of the nosedrive
10-12-2007, 03:43 PM
#9
Senior Member
Certified GM nut
Thread Starter
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
my camrea doesnt have that. all i have is a kodak 4.0 mp c310.
and if it did, no, i dont know what that does.
and if it did, no, i dont know what that does.
time for a new camera