M62 rotors
#2
a question...what'* the coating for??? I was cleaning the carbon off of my 94 rotors and the coating just started peeling right off. I just took the rest of it off to keep it from going into the intake.
#3
Senior Member
Certified Car Nut
Thread Starter
I think it was a teflon layer. The rotors should have very little clearence between them, but the outer coating was teflon to reduce wear. Without it, you should be fine, just a little more clearence.
#4
Senior Member
Certified Car Nut
Thread Starter
BTW, I ask because I'm considering swapping the old nose, bearings, and rotors from my 92 SC to the 94 on my car now. My bearings are kinda noisy recently, and I remember them being quieter on the old one.
#7
Junior Member
Posts like a Ricer Type-R
That'* normal. You'll see the same thing on the back of the throttle plate. The teflon coating on the rotor'* isn't there to reduce wear, either. It'* for helping to reduce the carbon buildup. Rotors don't ever touch each other or the rotor casing, anyway
Thread
Thread Starter
Forum
Replies
Last Post
Drunken Sailor
Forced Induction
1
11-02-2007 07:15 AM