anyone ever had o change the smooth sc idler pulley?
#11
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
forgot some stuff.
remove right front wheel
remove plastic skirting
side 2 bolts from t-axis are easier to get at from wheel well
remove right front wheel
remove plastic skirting
side 2 bolts from t-axis are easier to get at from wheel well
#12
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
one more thing, replace the water pump while your there. unless it has recently been replaced of course. Nothing like going back in there a month later like I had to do.
#13
DINOSAURUS BOOSTUS
Expert Gearhead
I'm in total agreement with Sonoma. I was going after a possible issue.
When you pull the ps pump for that leg of the mount, the torque axis motor mount, etc to get to that pulley.. do the waterpump.
I'd say 3 hours is about right if you haven't pulled it all before. Especially since we all know taking a little extra time and doing things right is the only way to go.
When you pull the ps pump for that leg of the mount, the torque axis motor mount, etc to get to that pulley.. do the waterpump.
I'd say 3 hours is about right if you haven't pulled it all before. Especially since we all know taking a little extra time and doing things right is the only way to go.
Thread
Thread Starter
Forum
Replies
Last Post
iceburn2003
1992-1999
3
10-08-2012 06:53 PM