3.5 vs. 3.4 vs. 3.25 vs.3.0 pulleys
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Apr 2006
Location: Schaumburg, IL
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
3.5 vs. 3.4 vs. 3.25 vs.3.0 pulleys
Can anyone tell me the major differences between pulley sizes:
What other mods are required, hp gains, etc.
I have 3.5 and want to know what is the benefit of going down to a 3.25 with my current mod list? Are there trade offs to downsizing the pulley?
What other mods are required, hp gains, etc.
I have 3.5 and want to know what is the benefit of going down to a 3.25 with my current mod list? Are there trade offs to downsizing the pulley?
#2
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
looks like 3.5 may be your limit till you do something like rockers, pems, fwi, etc. I run a 3.4 with rockers and fwi, only using a 3.2 for racing. If you don't get more air flow, you will get kr and defeat the purpose of a smaller pulley (to push more air)
#4
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
You may want to check out our performance packages at
http://www.intense-racing.com/Mercha...ategory_Code=P
The various mods show what is usually necessary for various pulley sizes to a point.
http://www.intense-racing.com/Mercha...ategory_Code=P
The various mods show what is usually necessary for various pulley sizes to a point.
Thread
Thread Starter
Forum
Replies
Last Post
95naSTA
Performance, Brainstorming & Tuning
12
03-20-2003 10:51 PM