94 Bonneville SSEi Supercharger Pulley
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
94 Bonneville SSEi Supercharger Pulley
Once I fix up my new Bonneville'* supercharger, I would like to put on a smaller pulley. I'm aware it'* smaller than 3" in diameter, so what do you think I should get, and does anyone already have one for sale?
#2
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bonney Lake/Ellensburg, Washington- WCBF '04, '05, '06, '07 Survivor-
Posts: 7,099
Likes: 0
Received 0 Likes
on
0 Posts
Typically a series 1 with that */c, a performance pulley would be 2.5"
http://pulleyboys.com/gms1p.html
Best product out there and a great price. Tell them John *. From bonnevilleclub sent ya
http://pulleyboys.com/gms1p.html
Best product out there and a great price. Tell them John *. From bonnevilleclub sent ya
#3
Junior Member
Posts like a Ricer Type-R
Before you do that, you MUST know your fuel pressure (post it here), and check your exhaust manifolds for cracks.
A full tune-up should be done first, and scan the car for KR before and after the pulley. It'* not just a plug-play situation. There are alot of dependencies.
We've had alot of Series 1 owners try smaller pulleys with bad results.
A full tune-up should be done first, and scan the car for KR before and after the pulley. It'* not just a plug-play situation. There are alot of dependencies.
We've had alot of Series 1 owners try smaller pulleys with bad results.
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Pulleys
Thanks for the concern. I'm going to replace my stock exhaust manifold before I put in the new pulley. In fact, the pulley may be my last upgrade, but I'd like to buy one now to have it and feel good about the purchase. Tomorrow, I'm going to get a full tune-up, including an oil change, tire rotation & balancing, brake line bleeding and refilling, and later on in the day, I'm going to test my fuel pressure. I want to buy a fuel pressure sensor because I want to mod that as well in my car.
It'* quite insane, I think, but I want to try it. I may do pretty well if I have a new and improved manifold, right?
It'* quite insane, I think, but I want to try it. I may do pretty well if I have a new and improved manifold, right?
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
salmanman
Performance, Brainstorming & Tuning
21
03-27-2003 02:29 PM
Mr Bean
1992-1999
9
02-19-2003 11:34 PM