door lock with aftermarket remote start not locking properly
#1
Member
Posts like a V-Tak
Thread Starter
door lock with aftermarket remote start not locking properly
I have an ULTRASTART 1270 and it works well... EXCEPT. 1. When I start it, it unlocks and stays unlocked... I can not lock it EVEN after it is started(with the remote). When I shut it off, it will automatically lock the doors. It won't lock unless i hit unlock first, then unlock. This is the weirdest situation I have found. Help.
#2
Senior Member
Posts like a Turbo
Join Date: Mar 2007
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
have you tried unplugging the battery and let the system chill itself out
I have an avital system in my 92 and it did that once.
How long have you had that system in your car?
I have an avital system in my 92 and it did that once.
How long have you had that system in your car?
#3
Member
Posts like a V-Tak
Thread Starter
I just installed it... I have done several before, and this one poses a problem. I can unplug the circuit for the door lock/unlock and it will still lock and unlock via the alarm arm and disarm wire in the door. the yellow (rearm) and the lt green (disarm). Not too sure where to go from here.
Thread
Thread Starter
Forum
Replies
Last Post
bonnie94ssei
Everything Electrical & Electronic
20
06-26-2006 07:04 PM
caminated2k
Everything Electrical & Electronic
14
11-27-2005 02:53 AM
anthonyv62
Everything Electrical & Electronic
0
05-18-2004 10:25 PM