Window motor
05-19-2006, 09:31 PM
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: May 2004
Location: Minnesota
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Window motor
I am trying to replace my driver'* window motor. I cant figure out what needs to be done to get it out. There is some plastic housing over the gear that is connected to some plastic cord thing. Does anyone have any information on how to remove it? Pictures would be great and much appreciated.
Thanks
Thanks
05-22-2006, 12:13 PM
#2
Senior Member
True Car Nut
Well, I'm not going to be much help, as I've never done it on mine and besides, your'* is a '90, but in an attempt to scare up someone who can help you, this is the best I have so far...
I will continue to see if there'* someone who has this info. 
Originally Posted by Anonymous
I have no pics either... But have helped do a few... memory is a bit too vague for it tho...
I know the rivets for the assembly have to come out, as well the rollers that go into the track have to be removed and the window supported while doing so (it helps to have a second set of hands... Basically the Motor/Track assembly (that Nylon cord) has to come out as one unit...
I know the rivets for the assembly have to come out, as well the rollers that go into the track have to be removed and the window supported while doing so (it helps to have a second set of hands... Basically the Motor/Track assembly (that Nylon cord) has to come out as one unit...
05-22-2006, 01:01 PM
#3
DINOSAURUS BOOSTUS
Expert Gearhead
I wonder it this would get better attention if we had it moved to the mechanical section since it'* more the mechanics of changing the motor then the diagnosing of the motor.
That way it would be in with the 87-91 guys and surely someone has experience.
That way it would be in with the 87-91 guys and surely someone has experience.
Thread
Thread Starter
Forum
Replies
Last Post