corrosion galore
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Amesbury Mass
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
corrosion galore
sawgunner came by today we messed with the boonie put in ddm still no power to any door other than drivers door continued the search and low and behold probley 75% of the bottom of the fuse block was all corroded yakkkkkk thinking either take the time to disasemble and clean or find another 2000 ssei in the bone yard somewhere or maybe some one on the forum might have an old harness that can be cut and i can connect in plase of mine wiht shrink wrap connecters ,share your thoughts please its just one more thing
#3
Senior Member
True Car Nut
Was the car ever submerged in water?
You can try some electrical cleaner and jiggled the wires and connectors to clean the contacts off. If that doesn't work, then you probably need to pull everything apart and clean them individually, or as you suggested get a wire harness from a donor car and cut and splice.
I think I'd be checking the ground buses on the A and B pillars as well as pull the carpet up and check the connectors and buses on the floor pan.
You can try some electrical cleaner and jiggled the wires and connectors to clean the contacts off. If that doesn't work, then you probably need to pull everything apart and clean them individually, or as you suggested get a wire harness from a donor car and cut and splice.
I think I'd be checking the ground buses on the A and B pillars as well as pull the carpet up and check the connectors and buses on the floor pan.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Amesbury Mass
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
This is what i know
I know,the only door that has any power is the drivers door,I know i need to clean and repace corroded fuse block uder rear seat,I replaced ddm,know change,this morning found only drivers door trips interior lights,have checked and do have ground and power going to all doors?none of the three doors do anything by there seperate switch or the switches on drivers door, dashboard sentry only acknowledge drivers door and truck lid being ajar am attempting to find scan tool any thing im missing please advise .Also final cure will be posted I WILL NEVER GIVE UP THESE WINDOWS WILL WORK WHETHER THEY WANT OR NOT
#9
DINOSAURUS BOOSTUS
Expert Gearhead
What we don't know, but need to:
1. Year, model and trim level
2. What you are trying to accomplish (ie. window only problem, locks as well or even more?)
Please fill in the above and we can help you much better. While I'm waiting, this post is going to move to the electrical section to better help you get views.
1. Year, model and trim level
2. What you are trying to accomplish (ie. window only problem, locks as well or even more?)
Please fill in the above and we can help you much better. While I'm waiting, this post is going to move to the electrical section to better help you get views.
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Amesbury Mass
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Ok just got home frome work,the car is a 2000 ssei,trying to fix the windows , locks ,ect in both passengers doors and the drivers rear door,they all have power to both the small and large orange wires ,they all have gound,all body grounds under rug are displaying gound when check with a test light also they do not show door ajar on sentry the doors do not trip the inteirior lights when opened