Air mix actuator...
07-28-2010, 12:50 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Air mix actuator...
I have seen the thread about changing the air mix actuator, but on my 94 bonnie, when I take out my glovebox, there is this black bar that completely blocks the actuator. I removed all the bolts to no avail...the bar will not come out. Do I need to remove the whole dash or what? Please help!
07-28-2010, 01:59 PM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Stan the man once did a write up on this and it'* still rocking.
http://trialsnuts.com/ecc.pdf
Give that a whirl. You'll get a couple scratches and I like to pull the heater box cover vs working on top. It'* all on par though.
http://trialsnuts.com/ecc.pdf
Give that a whirl. You'll get a couple scratches and I like to pull the heater box cover vs working on top. It'* all on par though.
09-04-2010, 11:52 PM
#5
Junior Member
Join Date: Jan 2008
Location: Chattanooga, TN
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2002 Bonneville and I'm told that the actuator is either not working or stuck. In the winter I get AC on the driver'* side and heat on the passenger. In the summer it doesn't matter as I get AC on both sides. Any help to know where the actuator is and how to repair or replace and where I can buy one?
Thread
Thread Starter
Forum
Replies
Last Post
getpecked
Everything Electrical & Electronic
5
10-17-2007 07:15 AM
