Heater
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2002
Location: Oshawa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Heater
Hey, my heater doesn't seem to work properly.
Sometimes when engine is hot, it blows cold, sometimes warm.
How is the heater flap contolled? By vaccuum, or electronic?
That might be the prblem.
Sometimes when engine is hot, it blows cold, sometimes warm.
How is the heater flap contolled? By vaccuum, or electronic?
That might be the prblem.
#2
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Heat and cold is controlled by the airmix door and it'* actuator which is electronically controlled. The airmix door actuator is accessible through a small hole behind the glovebox door. If you want full heat, you can pop the rod off the actuator and set the rod door all the way to the right (passenger side).
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
See this thread for how to re-adjust the airmix controller.
http://www.bonnevilleclub.com/forum/...ic.php?t=46880
http://www.bonnevilleclub.com/forum/...ic.php?t=46880
Thread
Thread Starter
Forum
Replies
Last Post