98 AL7 compressor problems (not working at all)
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
98 AL7 compressor problems (not working at all)
First off
is this the compressor
Whats this
I hear the relays clicking but no lumbar support
BTW this is going into a Caprice,
razysmile:
is this the compressor
Whats this
I hear the relays clicking but no lumbar support
BTW this is going into a Caprice,
razysmile:
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
What do I need to take it apart?
Any pics or could you give me some idea on how to do it?
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
98 AL7 Wiring Schematic
Cant figure out why my compressors not kicking on,
It runs fine, (tested it off the seats) but wont move the lumbar at all, or even turn on.
It seems that I have a wire just hanign out on the seat, it has a white plug and has orange, pink, blue wires on it. where does it go?
Theres no spot for it, did I leave part of the harness in the donor car?
BTW this going into a 92 caprice wagon
It runs fine, (tested it off the seats) but wont move the lumbar at all, or even turn on.
It seems that I have a wire just hanign out on the seat, it has a white plug and has orange, pink, blue wires on it. where does it go?
Theres no spot for it, did I leave part of the harness in the donor car?
BTW this going into a 92 caprice wagon
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I did that nothing inside, the comp even kicked on and was pumping air.
Still not working.
New thread
https://www.gmforum.com/t279762/
Still not working.
New thread
https://www.gmforum.com/t279762/
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Sorry, no new thread is needed to continue the same discussion. That tends to confuse the folks trying to help you as the two threads take similar paths to the same fixed end result.
If you have any connectors w/o the other side, you are missing part of the harness or a module.
If you have any connectors w/o the other side, you are missing part of the harness or a module.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, no new thread is needed to continue the same discussion. That tends to confuse the folks trying to help you as the two threads take similar paths to the same fixed end result.
If you have any connectors w/o the other side, you are missing part of the harness or a module.
If you have any connectors w/o the other side, you are missing part of the harness or a module.
A schematic of the diagram would help me.
BTW 13 second bonnie I love to see cars that are not supposed to be fast get down.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
I'm positive. Done a couple swaps with these seats myself. When I finish pruning the wiring etc from the car there'* three things to hook up.
Power
Ground
Illumination to the switches
All connectors have a home and all get connected.
13 second is actually more like a 12 second car with a poor driver.
Power
Ground
Illumination to the switches
All connectors have a home and all get connected.
13 second is actually more like a 12 second car with a poor driver.
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
WTH I dont see, how at all, where else could the connections go? it just one on the passenger seat, no other plug is empty.
Someone Plz post a schematic of 98 Al7s
You have any vids of that car? I gotta see it.
Someone Plz post a schematic of 98 Al7s
You have any vids of that car? I gotta see it.
#10
DINOSAURUS BOOSTUS
Expert Gearhead
I can post schematics tonight when I'm home. If you need ti sooner try searching, it'* probably on the site somewhere.
Got a pic of the connector on the passenger seat that is empty? Both should be connected though. IIRC there'* two passenger and three on the driver side, three to the switches.
Got a pic of the connector on the passenger seat that is empty? Both should be connected though. IIRC there'* two passenger and three on the driver side, three to the switches.