Stock 2000 radio
12-29-2006, 07:22 AM
#2
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
First is removal of the instrument panel cluster trim plate, then radio removal.
Removal Procedure (trim plate)
1. Lower the steering column to the lowest position.
2. Remove the ignition cylinder bezel. (gently pry out with screw driver)
3. Remove the DIC switch pod. (gently pry out with screw driver)
4. Remove the 2 push pin retainers. (under visor area of cluster, pins face up)
5. Remove trim plate by pulling rearward to release clips.
Removal Procedure (radio)
1. Depress the 4 spring clip retainers at the sides of the radio.
2. Pull the radio straight out.
Removal Procedure (trim plate)
1. Lower the steering column to the lowest position.
2. Remove the ignition cylinder bezel. (gently pry out with screw driver)
3. Remove the DIC switch pod. (gently pry out with screw driver)
4. Remove the 2 push pin retainers. (under visor area of cluster, pins face up)
5. Remove trim plate by pulling rearward to release clips.
Removal Procedure (radio)
1. Depress the 4 spring clip retainers at the sides of the radio.
2. Pull the radio straight out.
Thread
Thread Starter
Forum
Replies
Last Post
metallica84
Audio (and aftermarket electronics)
2
06-22-2013 07:25 AM
hvactech
Performance, Brainstorming & Tuning
12
05-10-2005 10:14 PM
bill buttermore
Audio (and aftermarket electronics)
6
09-09-2004 09:14 AM
